www.etractorimplements.com
27
OPERATION
Although the 3 Point Hitch Wood Chipper is easy to use, each operator should review this section
to familiarize himself with the detailed safety and operating procedures. When using this machine,
follow this procedure:
1. Clear the area of bystanders, especially small
children.
2. Review and follow the Pre-Operation Check-list.
3. Attach the machine to the tractor.
4. Drive to the work area and position at the
worksite.
5. Set park brake.
6. Stop engine.
7. Remove ignition key and place in your pocket.
8. Move the feed hopper down into its working
configuration and secure with the anchor nuts.
9. Turn discharge hood to its working position.
10.
Starting the Machine:
FEED HOPPER/DISCHARGE HOOD
a.
Start the tractor engine.
b.
Move the throttle to its low idle position.
c.
With the engine at low idle, slowly engage the
PTO control.
d.
Slowly increase the engine speed until the
PTO is at rated speed.
e.
With the manual feeding model, start feeding
material into the hopper.
f.
With the hydraulic feeding model:
Place the tractor hydraulic lever into its
detent position.
Move the control lever into the feed
position.
Start feeding material into the hopper.
11.
Stopping:
a.
Stop feeding material into the hopper.
b.
Place the hydraulic feed control in off/neutral.
Hydraulic Feed
c.
Slow engine RPM.
d.
Place hydraulic lever in its OFF position.
e.
Disengage PTO.
f.
Stop engine, remove ignition key and place in
your pocket and wait for all m oving parts to stop.
Working
Summary of Contents for BX52
