Assembly / Owner’s Manual
7
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a
minimum workout area of 200.7 cm x 317.5 cm (79” x 125”). Be sure that the workout space you are utilizing has adequate height clearance, taking
into consideration the height of the user and the maximum incline of the elliptical machine.
Basic Assembly
Follow these basic points when you assemble your
machine:
•
Read and understand the “Important Safety Instructions”
before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts
and nuts to the right (clockwise) to tighten, and the
left (counterclockwise) to loosen, unless instructed
otherwise.
• When attaching 2 pieces, lightly lift and look through the
bolt holes to help insert the bolt through the holes.
•
The assembly requires 2 people.
• Do not use any power tools for assembly.
Machine Mat
The Bowflex™ Machine Mat is an optional accessory that helps keep your workout area clear and adds a layer of protection to your floor. The rubber
machine mat provides a non-slip, rubber surface which limits static discharge and reduces the possibility of display errors. If possible, put your
Bowflex™ Machine Mat in your selected workout area before you begin assembly.
To order the optional machine mat, contact your local distributor.
Specifications / Before Assembly
Maximum User Weight:
170 kg (375 lbs)
Total Surface Area (footprint) of equipment:
15492 cm
2
Maximum Pedal Height - with full incline:
73.7 cm (29”)
Machine Weight:
approx. 119 kg (263 lbs)
Power Requirements:
Operational Voltage:
220V - 240V AC @50Hz
Operating Current:
8 A
Heart Rate Chest Strap:
1 CR2032 battery
Complies with the following:
Connectivity:
DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product, please follow the
prescribed methods at an approved waste center.
177.8 cm
(70”)
78.8 cm (31”)
196.6 cm (77”)
3.18m ( 125” )
2.01m
( 79” )
0.6m
( 24” )
0.6m
( 24” )
0.6m
( 24” )
0.6m
( 24” )
Summary of Contents for BXE226
