32
3. Using a clean rag or paper towel, clean both the Axle and the Wheel Bearing (including the inner edge). Wipe off any residue or debris.
4. Apply one drop of Multi-purpose Mineral Oil to
the inside of the Wheel Bearing (Areas 1 and 2),
which is the surface that contacts the Axle.
Apply 4 drops of oil in the space between the
Wheel Bearings (Area 3 ).
Apply a thin coating of oil to the length of the Axle
(Area 4).
Note: Do not allow any oil onto the outside
material of the Wheel.
Do not use any silicone-based lubricant or
grease.
Use a disposable towel or rag to prevent any oil
from getting onto clothing or area.
5. Re-assemble the Wheel Assembly. Be sure that the Larger
Washers are placed between the Wheel and the Wheel Bracket.
Spin the Wheel a couple times by hand to help the lubricant
distribute evenly.
6. Final Inspection
Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully
assembled and inspected for correct performance
in accordance with the Owner’s Manual.
Wheel Bracket
Larger Washer
Larger Washer
