FOLDING & MOVING BOWFLEX
Folding and moving your Bowflex is easy.
Follow the simple steps below to fold your
Bowflex. Once it’s folded, simply tilt the
machine back on its transport wheels to roll
the machine to any location.
• Bind the Power Rods
®
with the rod
binding strap.
• Remove the threaded knob on the platform.
• Tilt the bench up to the Power Rods
®
.
• Link the two hooks on the end of the cables
together, over the top of the incline support
bracket on the bench.
• Slide hand grips over opposite bench legs,
crossing the cables to do so.
• Wrap the Leg Press Belt around Power Rods
®
and link hooks to D-rings on
hand grips.
MAINTENANCE & CARE OF
YOUR BOWFLEX
Your Bowflex requires very little maintenance.
To keep your Bowflex in top condition check all
fasteners and Rod Caps before each workout
and tighten as needed.
Clean the bench with a non abrasive cleaner
after each use. This will keep it looking new.
Any non abrasive household cleaner or soap
works well. Many automotive interior cleaners
make surfaces too “slick” and should not be
used.
If you have any questions regarding
maintenance please call our customer service
department at 1-800-269-3539.
Using Your Machine
5