Assembly / Owner’s Manual
22
7. Make sure that the locking mechanism is engaged. Carefully pull back on the walking deck and make sure that it does not move. When you do
this, keep clear of movement path in case the treadmill lock is not properly engaged.
Do not lean against the treadmill when it is folded. Do not put items on it that could cause it to become unstable or fall.
Do not connect the power cord or try to operate the treadmill in the folded position.
8. Stand to one side of the treadmill. Place your front foot so it pins the Base As-
sembly. Grasping the Side Handrail, carefully pivot the treadmill rearward until it is
balanced fully on the transport wheels. Be sure not to pivot the machine too far. Hold
the treadmill in the balanced position.
This step may require two persons, one on each side of the treadmill. The
treadmill is heavy and can be awkward. Make sure that your own physical
strength is capable of pivoting the machine.
Always wear fully enclosed shoes when moving this machine. Do not
move the machine with bare feet or only wearing socks.
Do not use the Console or lifted Walking Deck to pivot or move the tread-
mill. Injury to you or damage to the machine can occur.
Keep clear of the movement path of the lifted Walking Deck.
9. Grasping the Side Handrail and the front of the Upright, safely roll the treadmill
to the desired location.
The treadmill is heavy and can be awkward. Make sure that your own
physical strength is capable of moving the machine.
Place the machine on a clean, hard, level surface, free from unwant-
ed material or other objects that may hamper your ability to move
freely. A rubber mat should be used below the machine to prevent
the release of static electricity and protect your flooring.
Do not put objects in the path of the walking deck when lowered.
NOTICE:
Move the machine carefully so that it does not hit other ob-
jects. This can damage the Console operation, the treadmill,
or the area around the machine.
10. Safely lower the treadmill into the desired position. Be sure there is adequate
space for the machine before lowering it.
11. Prior to use, refer to the “Unfolding the Machine” procedure in this manual.