Designed for Long-Term, Heavy-Duty Applications
Designed for Long-Term, Heavy-Duty Applications
The combination of copolymers (Acrylonitrile,
Butadiene, and Styrene) gives ABS an excellent
combination of strength, rigidity, and toughness.
ABS is chemical and stress-crack resistant. It is
tough, dimensionally stable, and will hold up to
long-term use. It possesses high strength and
performance characteristics at a reasonable cost.
Copolyester resin is designed for heavy-duty
applications, and is used by BOWMAN® Dispensers.
We never use acrylic in our products.
Copolyester (PETG) is typically 15-20 times tougher
than general purpose acrylic. PETG is made to
withstand handling and reduce losses due to
breakage.
PETG resists a variety of chemicals and commonly
used cleaning agents. It is tough and durable (not
brittle), providing years of trouble-free functionality
and long life.
Clear optical characteristics mean the viewer can see
the content, read text, and see true colors through
the material. It complies with FDA regulations for food
contact.
For best results, clean by washing the surface with
a diluted solution of a mild, non-abrasive detergent
in cold or warm water and a non-abrasive cloth.
Standard hospital cleaning supplies can be used.
Dry with a soft cloth. Do not use any solvent-based
materials, abrasives (e.g. Scotch-brite, steel wool), or
apply excessive force during cleaning.
Most cleaning chemicals do not weaken the surface
or cause damage to the material. Suggested cleaning
method is to use a soft cloth, warm water, and mild
soap.
ABS Plastic
RS001-0212
PETG Plastic
MP-075
Material Characteristics
Care and Cleaning
Characteristics & Care
BD212-0012
Cover Your Cough Compliance Kit
BD212-0012 - Characteristics & Care
Information subject to change without notice. Dimensions are approximate. (Not to scale)
BOWMAN Dispensers
20325 71
st
Ave NE, Suite D, Arlington, WA 98223
800.962.4660 • www.BowmanDispensers.com
