BOWMAN® Charge air coolers are constructed to current practice and recognised safety
standards. Hazards may still arise from operation, such as:
•
Injury of the operator or
•
Third parties or
•
Damage to the cooler or
•
Damage to property and equipmen
t
Any person involved with the installation, commissioning, operation, maintenance or
repair of the cooler must be:
•
Physically and mentally capable of performing such work
•
Appropriately qualified
•
Comply completely with the installation instructions
The cooler must only be used for its intended purpose.
In the event of breakdowns which may compromise safety, a qualified person must always be contacted.
1.2 Safety Instructions
The following symbols are used in these operating instructions:
This symbol indicates an immediate danger to health.
Failure to comply with this instruction may result in severe injury.
This symbol indicates a possible danger to health.
Failure to comply with this instruction may result in severe injury.
This symbol indicates a possible risk to health.
Failure to comply with this instruction may result in injury or damage to property.
This symbol indicates important information about correct handling of the equipment
Failure to comply with this instruction may cause damage to the heat exchanger
and/or its surroundings.
1.3 Approved use
1. Safety
1.1 Hazards When Handling the Cooler
BOWMAN® charge air coolers are only approved for cooling charge air.
Any other use unless sanctioned by BOWMAN® is not approved.
BOWMAN® declines all liability for damage associated or arising from such use:
The maximum permissible operating pressure must not exceed:
Charge Air:
5.5 bar g (EC120 - GK190)
4.0 bar g (JK190 - RK250)
Water:
16.0
bar
g
2
4
Danger
Caution
Take Care
