04
Apply a good coating of CD90 to the rod end
bearing where the spring attaches.
The sprockets underneath the stainless steel
cover should be lubricated every 6 months
with grease applied with a paint brush or CD90
oil spray.
Servicing and maintenance
Lubrication
The following moving parts of the Supermatch One need top be lubricated once a month, particularly if the trap is
left outside in all weather conditions.
The iris jaws should be free moving and snap back
into place. Use WD40 or GT85 spray to clear these
from clay dust. Do not use oil or grease on this part
as it may cause the jaws to stick.
The twin spring supports require a light amount
of lubrication with CD 90 oil spray.
Clear out the twin spring support slider of clay
dust with GT85 and provide a light amount of
CD90 oil spray.
