Page 7/14
February 2021
LOG SPLITTER | User manual
2.4
Storage Safety
1.
Store the machine in an area away from human activity.
2.
Do not permit children to play on or around the stored machine.
3.
Store the machine in a dry, level area.
4.
Clean grease and oil as required and protect it from the elements.
2.5
Maintenance Safety
1.
Good maintenance is your responsibility. Poor maintenance is an invitation to trouble.
2.
Follow good shop practices.
3.
Keep service area clean and dry.
4.
Be sure electrical outlets and tools are properly grounded.
5.
Use adequate light for the job at hand.
6.
Make sure there is plenty of ventilation. Never operate the engine in a closed building. The exhaust fumes may
cause asphyxiation.
7.
Before working on this machine, shut off the engine, set the brakes, and remove the ignition key.
8.
Never work under equipment unless it is secured by a mechanical stand.
9.
Use personal protection devices such as eye, hand and hearing protectors, when performing any service or
maintenance work.
10. Always release residual energy from pressurised hydraulic fluid and allow the fluid to cool before doing any
maintenance or repair work on the log splitter.
11. Never use your hand or any part of your body to check for hydraulic system leaks while the system is
pressurised.
12. Never remove the fill/dipstick cap from the hydraulic fluid port while the hydraulic circuit is live or while the
tank is still warm after operation. Hot pressurised fluid can cause serious injury, so wait for the hydraulic tank
to cool before removing cap.
13. The log splitter must be on a level surface.
14. Get professional medical help at once if hydraulic oil penetrates anyone’s skin.
15. Never adjust the hydraulic system.
16. Only use genuine parts for service and maintenance.
17. A fire extinguisher and first aid kit should be kept readily accessible while performing maintenance on this
equipment.
18. Periodically tighten all bolts, nuts and screws and check that all pins are properly installed to ensure unit is in
a safe condition.
19. When completing a maintenance or service function, make sure all safety shields and devices are installed
before placing machine in service.
