Pre Start Inspection and Operation
3.7
6.
Check the fuel filter/water separator to make sure that there is no water in the filter bowl
(Item 1,
Figure 3–6
).
Figure 3-6 Engine Fuel Filter/Water Separator
•
Allow engine to cool before removing the filter bowl. Spilled fuel can potentially
ignite or explode.
•
Place a container underneath the filter assembly to catch any spilled fuel.
• Properly dispose of fuel according to State and Local regulations.
If water needs to be removed;
If the fuel bowl does not fill with fuel, it may be necessary to air bleed the fuel system.
See Section 4 – Fuel System Air Bleed instructions.
1
2
CAUTION
1.
Rotate the fuel shut off valve (Item 2,
Figure 3-6) to s
top the fuel flow from the tank.
2.
Place a suitable sized container beneath the filter assembly to catch any spilled fuel.
3.
Rotate the filter bowl (Item 1,
Figure 3-6) and
remove it from the filter assembly.
4. Dispose of the fuel and water in the bowl according to State and Local regulations.
5.
Reinstall and secure the filter bowl.
6. Reopen the fuel valve.
NOTICE
