Boxfish ROV Owner’s Manual
V1.3. All rights reserved. Information and specifications may change at any time without notice.
p14
14. Depth sensor
Port containing ROV depth sensor
15. Vacuum port
Port for applying vacuum to ROV body
16. Off pad (red)
For powering off ROV using magnetic key
17. On pad (green)
For powering on ROV using magnetic key
Control Station
The Control Station is a multifunctional unit that is used to:
Receive and display video and telemetry data from the ROV
Pilot the ROV
Record video (via Ninja V recording accessory)
Plug in optional accessories or computers
Update software and firmware for the ROV and Control Station.
The Control Station attaches to the tether reel via a fibre patch cable. The
tether reel in turn is attached to the ROV via the tether cable.
IMPORTANT!
The Control Station is designed to be splash-proof but it is not waterproof.
Ensure all ports are covered when not in use. Do not block the air vents (34)
otherwise the Control Station could overheat.