29
Video Input
To store the adjustment data, select Store and press the Point Right
button. The Image Level Menu will appear. Choose one of 4 image
levels with the Point Up/Down button and press the SELECT button.
A confirmation box will appear and select [Yes].
The Image Level Menu will
appear. Choose one of 4
image levels with the Point
Up/Down button and press the
SELECT button. A confirma-
tion box will appear and select
[Yes].
Resets all adjustment to their previous figure.
Reset
Store
Interlace video signal can be converted to a progressive signal.
Off ···· Not activated.
L1 ···· Select “L1” for an active picture.
L2 ···· Select “L2” for a still picture.
Progressive
NOTE
●
You can also adjust items with the IMAGE ADJ. (IMAGE) button on the
remote control. (p12)
●
Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is
selected.
Press the Point Right button at
this icon to store the value.
When this function is on, it detects proper interleaving of 3-2 pull
down for film-base sources and produces a suitable image for the
input source. (This function is available only when selecting L1 or L2
on Progressive for NTSC.)
Film
Press the Point Left/Right button to obtain better balance of contrast.
(From -7 to +7)
Gamma
Press the Point Left button to soften the image and the Point Right
button to sharpen the image. (From -7 to +7)
Sharpness
When this function is "ON", it automatically enhances contrast of
bright and dark part of image.
Auto grayscale
This arrow indicates that there
are previous items. Select this
item and press the Point Up
button to go to the previous
item.
