4
Basic safety instructions
Sprühboy 04s - Airless Edition 10.12
2
Basic safety instructions
This instruction manual contains the most important
information for a safety conscious operation of this
implement.
2.1
Obligations and liability
Observe the information contained in the instruction
manual: A basic requirement for a safety conscious
handling and a trouble-free operation of this
implement is the knowledge of the basic safety hints
and safety advice. This instruction manual, especially
the safety hints, must be observed by all persons who
operate the implement. In addition, the rules and
regulations for the prevention of accidents applicable
at the place of application have to be observed.
Dangers when operating the implement:
The implement
Sprühboy 04s has been designed
according to the state of the art and approved safety
regulations in accordance with good engineering
practices according to Article 3, paragraph 3 of the
Pressure
Equipment
Directive
97/23/EC.
Nevertheless dangers for the health and life of the
user or third parties or impairments to the implement
or other material assets may arise during its use.
The implement may only be used:
•
for the intended use,
•
in a perfect condition as far as safety is
concerned.
Faults which might affect safety must be remedied
immediately.
Guarantee and liability:
In principle, our "General conditions of sale and
delivery" are applicable". These have been available
to the user at the latest since conclusion of the
contract. Warranty and liability claims for personal
injury or damage to property shall be excluded if they
result from one or several of the following reasons:
•
use contrary to the intended use of the implement,
•
Improper mounting, commissioning, operating and
maintenance of the equipment,
•
use of the implement with faulty safety equipment
or improperly fitted or inoperative safety devices
and guards,
•
not adhering to the hints in the instruction manual
regarding transport, storage, assembly, putting to
operation, maintenance and setting up the
implement,
•
unauthorised structural changes to the equipment,
•
inadequate monitoring of implement wearing
parts,
•
improper repair work,
•
catastrophes caused by alien elements and acts
of god.
2.2
Safety symbols
In the instruction manual the following terms and
signs for dangers are used:
2.2.1
General danger symbol
This symbol indicates a direct danger for life and
health of persons. Not adhering to these hints will
cause severe danger for health up to injuries with
high danger to life.
2.2.2
Attention symbol
This symbol gives important hints for the appropriate
handling of the implement. Not adhering to these
hints may cause faults on the implement itself or in its
environment.
2.2.3
Hint symbol
This symbol offers you hints for operation and
especially useful information. They will help you to
make best use of all functions on your implement.
