6
Basic safety instructions
Sprühboy 04s - Airless Edition 10.12
2.9
Cleaning, maintenance, repair and
remedy of faults
Carry out prescribed cleaning, maintenance and
inspection work in due time. Prior to all maintenance,
inspection and repair work:
•
separate the implement from the compressed air
source and then
•
actuate the spray gun and thus discharge the
residual air pressure in the system.
Check the firm seat of screw connections that have
been unscrewed beforehand. On completion of
maintenance work, check the function of all safety
devices.
2.10
Modifications
Never change anything on the implement, do not add
anything to the implement and do not convert the
implement without approval of the manufacturer.
All conversions require the written approval of
Messrs. boyens backservice GmbH.
Immediately exchange faulty implement parts.
Only use original spare- and wearing parts.
When using non original parts it cannot be
guaranteed that they had been designed and
manufactured in such a way that they correspond to
the operational and safety prescriptions.
2.11
Cleaning and disposing
Only use air, grease solvent and hot rinsing water for
cleaning purposes. Handle and dispose of all agents
and material in an appropriate manner.
To clean the implement, only use:
•
a moist sponge or a moist cloth,
•
never a high pressure cleaning device.
