Description of the implement
9
Sprühboy 04s - Airless Edition 10.12
3.3
Identification
The stainless steel pressure vessel's identification is
engraved directly onto the stainless steel vessel.
You will find the type plate on the back side of the
implement.
The implement Sprühboy 04s has been
designed according to the state of the
art and approved safety regulations in
accordance
with
good
engineering
practices
according
to
Article
3,
paragraph 3 of the Pressure Equipment
Directive 97/23/EC.
3.4
Technical data
Maximum permissible operating
pressure (PS):
6 bar
Minimum / maximum permissible
operating temperature (TS):
-20°C to +80°C
Energy supply:
An external compressed air source with a minimum pressure of 5
bar is required.
Compressed air connection:
Nominal width (NW) 7.2
Agent pressure:
at least 5 bar, at most 6 bar
Pressure relief valve, integrated in
bleed valve:
Set to maximum 6 bar at the factory
Stainless steel pressure vessel content: 5 litres
Weight:
2.4 kg
Measurements:
Diameter:
210 mm
Height:
250 mm
Length agent hose:
1.5 m
Agent-hose:
Silicone
Spray gun:
Airless
