background image

10. CH ERASE 

Press the button to erase the current channel, which you don’t like to see.

11. FINE TUNE -

Tunes the TV channel signal down by continuous clicking the button.

12. FINE TUNE +

Tunes the TV channel signal up by continuous clicking the button.

13. MENU

Press the button to pop up the OSD MENU

14. Arrow Buttons

Press the “Arrow” button to choose the items on the main menu or Sub-menu.
Press                      button to choose item on the menu or to move the 
OSD position.

15. EXIT

Exits the current menu selection and return to the previous menu. Press this key 
repeatedly to close all items.

17. ENTER

Selects the currently highlighted menu item or to confirm the setting.

19. C.C (This function is only supported by USA/NTSC area)

Enables / disables the closed caption function. 

21. V.CHIP (This function is only supported by USA/NTSC area)

Locks the channel for security considerations.

22. TTX ON / TTX OFF (for Most Pal system regions) 

Activates the Teletext menu. / Press the button to disable the Teletext menu. This key is 
to enable/disable the Teletext function.

23. REVEAL 

Displays the hidden text in Teletext page when suggested and the text will disappear 
automatically in 6 seconds.

24. PAGE –  

Pages down the Teletext index menu.

25. PAGE + 

Press the button to page up the Teletext index menu.

26. R/G/Y/B 

      The Red, Green, Yellow, Blue color buttons corresponds to the option line 

at the bottom of Teletext index menu. Not functional when there is no Teletext 
service available.

27. NUMBER KEYS

Selects the channel or key in the values.

28. CH + / -

Click to switch the channel forward and back.          

Please browse our online catalogue to view our full product range.

44-48 Maitland Road, Mayfield East, NSW, 2304 Australia, 

sales@converters.tv

Phone +61 249689313   Fax +61 249689314

www.converters.tv

Summary of Contents for VTB-100




























Reviews: