MAIN CONNECTION
Ensure that the mains voltage of your home corresponds to the operating
voltage of the unit. Your unit is ready to be connected to a mains voltage of
100-240V/50
／
60Hz
.
Bluetooth Connection
Put on Bluetooth mode (#19) then paired with your device
AMPLIFIER CONNECTION (if required)
Whilst you can listen to your new turntable using the built in speakers you may
wish to connect it to your existing Hi Fi system. Connect the audio plugs to the
AUX input on your mixer or amplifier using an RCA cable (not supplied)
Red plug into R/H channel input.
White plug into L/H channel input.
BOYTONE 101B
*The first time this Record Player is used, plug it in to charge battery for at least 30
minutes.
-
Playing a Record
1.
Remove Protective Stylus Cap.
2.
Choose desired playing speed using Speed Selection Switch.
3.
Put Auto-Stop Switch in the ON position if you want Turntable to stop when Tone
arm gets to the end.
4.
Place record on Turntable.
5.
Turn on Rotary Power Switch. This is also Volume Control.
6.
Release Tone arm Lock.
7.
Use your right hand to use Tone arm Lift Lever to raise Tone arm.
8.
While holding up Tone arm Lift Lever with your right hand, use your left hand to
move Tone arm into place over record. Record should begin to spin
.
(If Record
Player makes a popping sound, it needs to charge longer.)
*Clean records sound better and are easier on Stylus (needle). Use a proper record
cleaner.
