this step if only a USB drive or an SD/MMC card is inserted.)
4. The system will start the encoding mode after a few seconds. During encoding,
the USB or SD icon will be flashing on the display.
5. To finish encoding, press the stop button. The display will show “END” and
return to TAPE/AUX mode.
NOTE
:
• The recording speed is 1:1. Recording will take as long as playing the CD (or
other auxiliary input).
• The recording format is pre-set at MP3 bit rate 128 kbps.
The USB Port and SD Card Slot
Playback of music in MP3/WMA format via USB device or memory card
The system is able to decode and playback all MP3/WMA files stored in the
memory media connected to the USB port or SD/MMC card slot.
1. Turn the volume knob clockwise to turn the equipment on.
2. Following the illustration below, insert a USB device face up into the USB port,
making sure it is fully inserted. Alternatively, insert a memory card in the direction
of the arrow (as shown on the label next to the memory card slot), making sure to
insert it straight without bending.
IMPORTANT:
Connecting the USB device
upside down or backwards could damage the audio system or storage media
(USB drive, SD or MMC card). Check to ensure the direction is correct before
connection.
3. Set the function selector to USB/SD mode. (If you have both a USB device and
a memory card inserted, press the MODE button to toggle between USB and
