background image

14 

 

 

 

 

 

FAQs 

If you are experiencing problems with your USB Turntable with Cassette Deck and Radio, check in the 

section below whether there are any quick and easy checks you can do that may help you solve the 

problem. If you cannot solve the problem by yourself, contact our after sales support line for advice. Do 

not attempt to open, repair or modify the equipment yourself. 

Problems with sound 

 

• Clockwise rotate the power/volume knob to increase the volume. 
• Make sure the unit’s power cord is connected to an appropriate electrical outlet. 
• Make sure the wall socket is switched on. 
• Make sure the function switch is set to your desired function: PHONO, USB/SD, TUNER, AUX. 
• When playing records, make sure you have selected the correct speed (33, 45 or 78 rpm). 
• When playing a CD via the AUX IN connection, make sure the cable is firmly connected, all controls 

on the CD player are properly set, the disc tray is closed and the disc is clean and undamaged. 

• When playing music from a USB device (or SD/MMC card), make sure the memory device is properly 
inserted in the USB port (SD/MMC card slot) and the correct MODE is selected. 

Problems with radio reception

 

• Make sure you are in an area that can receive signals for your selected radio station. 
• If AM reception is weak, rotate or reposition the equipment to improve reception. 
• If FM reception is weak, try the following to improve reception: Completely unravel the wire aerial at 

the back of the cabinet. Slightly move the wire aerial for better reception. If none of these measures 

improve stereo reception, try the same station on the FM (mono) band. 

• Try moving your radio to an alternative location to see if the reception improves.   
•  Check  that  you  do  not  have  other  electrical  equipment  too  close  to  your  radio,  which  may  cause 
interference.

 

Summary of Contents for BT-22-B















Reviews: