1.9
Installation of Radial pipe to Plenums
90-degree plenum that can
be installed to walls and
ceilings.
Floor plenum that can be
fitted to floors and used
with a floor grille.
Straight plenum that can
be used for wall grilles or
converting 125 pipe to 2 x
75mm pipes.
Pro Plenum Kit.
Insert sealing ring in second
grove on radial pipe.
Insert one or two pipes into
plenum and fit the retaining
clips.
If only inserting one pipe,
please seal plenum with
provided blanking cap.
Insert sealing ring onto cap.
Push cap into plenum and
secure with retaining clips.
During installation, the radial
system needs to be kept airtight
to prevent condensation and
dirt entering the system.
Install end caps or tape both
the plenums and external
vents (distribution boxes if not
connected).
Contact Us! - Website: www.bpcventilation.com - Tel: 028 2827 5150 - Email: technical@bpcventilation.com
11
