BREAK - IN
The initial 5 hours of operation is most
important in the life of your DTV. Proper
operation during this break in period will
help assure maximum life of your DTV
engine.
The following guidelines will explain the
proper break in procedures.
1. During the first 5 hours of operation,
do not apply more than 1/2 throttle.
2. During the next 5 hours of
operation do not apply more the 3/4
throttle
Vary the engine speed
Make sure to vary the engine speed
during the break in period, this allows the
engine to load and unload which helps the
parts to seat properly. It is essential to
place some stress on the engine during the
break in process, however, too much
Break in period
Allow oil to circulate before
riding
Allow the DTV engine to warm up before
riding. This allows the oil to circulate
throughout the engine which lubricates
the components.
Observe your initial and most
critical maintenance service
The initial service( break in maintenance )
is the most important service for your DTV.
During the break-in time frame, all of the
engine components will have mated
together and seated. Maintenance
required as part of the initial service
includes correction of all adjustments,
tightening of all fasteners and
replacement of dirty oil. Timely
performance of this maintenance will help
make sure your DTV will have the best
service life and performance of the engine.
stress could cause damage to the engine
components. Be careful not to load the
engine too much.
9