9
BLENDER
1.
Always assemble the sealing ring onto the Blender Blade unit before you attach the blade unit
to the Blender Jug.
2.
Always allow the appliance to cool down for ten minutes after you have processed two batches.
3.
Never open the lid when the Blender is in operation.
4.
The Built
in safety lock ensures that the Blender can only be switched on when the Blender Jug
is aligned correctly and that the ridge on the blade unit is aligned with the ‘locked’ symbol on
the base unit.
5.
To add liquid during blending, remove the measuring cup and pour the liquid into the Blender
Jug through the hole in the lid.
6.
Cut solid ingredients into smaller pieces before you process them.
7.
If you want to prepare a large quantity, process small batches of ingredients instead of a large
quantity at once.
8.
Try to use cooked ingredients when you blend a soup.
9.
When processing a liquid that is hot or tends to foam (e.g. milk), do not pour more than 1 litre
into the blender jug at a time, to avoid spillage.
10.
If you are not satisfied with the result, switch off the Blender and stir the ingredients with a
spatula. Remove some of the contents to process a smaller quantity or add some liquid.
NOTE:
If ingredients stick to the wall of the Blender Jug:
1.
Switch off the Blender and unplug it.
2.
Remove the lid and use a spatula to remove the ingredients from the wall of the jug.
3.
Avoid touching the blades with the spatula.
4.
If solid pieces become lodged between the blades, remove the Blender Jug from the base before
attempting to remove the pieces.
