33
24. Engage the motor shaft in the brake clutch assembly
inner race, and lower the motor into place. Install four
(4) capscrews and lockwashers
25. Install the hydraulic hoses as shown, then tighten.
Continued on illustration no.26.
26. After the hoist assembly is complete, check all cap-
screws and fittings to make certain they have been
tightened correctly. Refill the hoist with the recom-
mended oil listed under maintenance suggestions.
Summary of Contents for C2H150A
Page 2: ...test...
Page 42: ...test...
Page 43: ...test...
Page 44: ...Copyright 2005 PACCAR Winch Division All rights reserved...