4
CH
Construction hoist
210
21,000–lb. first-layer line pull
A
Model series relating to design changes
36
Total gear reduction
110
Hydraulic motor displacement in cubic inches/revolution (decimal point eliminated,
example: 110–11.0 cubic inches/revolution)
01
Drum option
1
Permits testing and inspection per API 2C
for offshore cranes
Model number
and
Serial number
MODEL NUMBER AND SERIAL NUMBER
When information on a hoist is needed, always refer to
the model number and serial number. Both are located
on the top of the motor-side end plate as indicated above.
EXPLANATION OF MODEL NUMBER
CH 210 A - 36 110 - 01 - 1
Construction
Hoist
Max
Rating
Design
Model
Gear
Ratio
Motor
Size
Drum
Size
Option
MODEL IDENTIFICATION
