21
THERMOSTAT ADJUSTMENT - Honeywell V2 gas control.
160°F Control 180° Control
Figure 6 Figure 7
The thermostat dial is set to its lowest temperature setting when shipped from the factory.
Remember that lower temperature settings are more energy efficient
. Adjust the
temperature by turning the thermostat dial. It is suggested that the starting point setting not be
greater than the “HOT” mark on the thermostat dial (approximately 120°F [
48.9°C
]) as indicated
above. Rotate the thermostat dial
counter-clockwise
to decrease the temperature
setting. Rotate the thermostat dial
clockwise
to increase the temperature setting.
Adjust the dial until the minimum acceptable temperature is achieved (See figure 4 above for
approximate temperature settings).