Bradley LavCare LC500 L/F, Installation And Maintenance Instructions Manual

9

Bradley Corporation •

215-857 Rev. B; EN 97-1016

Bradley LavCare™ 500 Series Patient Care Module

Installation Instructions

Model LC500 L/F and L/W

Installation Instructions 

continued . . .

Step 5: Install the countertop to the
cabinet

1. Apply a bead of silicone caulk (supplied

by installer) around the top edge of the

cabinet and between the countertop and

the wall (see Figure 9).

2. Set the countertop in place on the cabinet.
3. Clean up any excess caulk around the

edge of the countertop.

Step 6a: Install faucet (with wrist-
blade faucet valve) and connect
water supply

NOTE:  On LC500 models with the foot valve

faucet, refer to step 6b found on page 10. On

LC500 models with the optional Futura™

faucet, use installation instructions specifically

for the Futura™  faucet when installing the

faucet and making the electrical connections.
NOTE:  To make supply connections easier,

remove the access panels first.

1. Place the faucet onto the countertop,

gently inserting the two faucet supply

shanks through the holes provided in the

lavatory bowl (see Figure 10).

2. Install the two washers provided onto

the supply shanks from beneath the

countertop. Secure the washers and the

faucet to the countertop with the two

wingnuts provided (see Figure 10).

3. Connect the hot and cold water supplies

to the faucet’s 1/2” NPT hot and cold

supply inlets (piping supplied by

installer) (see Figure 10).

4. Install the P-trap (supplied by installer)

to the sink’s 1-1/4” O.D. drain pipe

5. Connect the P-trap to the 1-1/4” NPT

drain pipe from the wall (piping supplied

by installer).

Figure 9

Figure 10

COUNTERTOP

SILICONE CAULK

WINGNUT

COUNTERTOP

1/2” NPT

HOT INLET

1/2” NPT

COLD INLET

WASHER

LAVATORY

BOWL

Installation Instructions

continue . . .