Classic Circular 36"/54" Washfountain with Foot Control
Installation Instructions
WF2605, WF2608 Terrazzo — WF2705, WF2708 Stainless Steel
Bradley Corporation • 215-603 Rev. M; EN 06-915B
9
4/6/2007
Installation Instructions continued . . .
Step 3: Bowl and pedestal assembly and mounting
IMPORTANT: FOR PROPER DRAINAGE, THE BOWL AND PEDESTAL MUST BE
LEVEL WHEN THEY ARE SECURED TO THE FLOOR .
WARNING: USE SUITABLE LIFTING EQUIPMENT TO POSITION THE BOWL AND
PEDESTAL ASSEMBLY. HANDLE WITH CARE! FAILURE TO DO SO
COULD RESULT IN SERIOUS PERSONAL INJURIES.
STAINLESS STEEL BOWL:
1. Place the bowl on the pedestal using
suitable lifting equipment.
2. Fasten the bowl to the pedestal with the
four flat head stove bolts provided. Place
the bowl clip inside the pedestal leg (see
Figure 5).
3. Position the bowl and pedestal assembly
so that the bowl drain is in line with the
trap or drain line (see Figure 6 at right and
figure 7 on page 10).
4. Screw the drain spud part of the way into
the drain to ensure correct alignment (see
Figure 7 on page 10).
5. Anchor the pedestal assembly to the floor
and wall with suitable anchors/fasteners
(supplied by installer).
TERRAZZO BOWL:
CAUTION: Bowl Surface is smooth.
Use suitable lifting
equipment to position
the bowl and pedestal
assembly. Handle with
CARE!
1. Place the pedestal assembly as shown in Figure 6.
2. Place the bowl on the pedestal using suitable lifting equipment.
3. Screw the drain spud part way into the drain to ensure correct alignment (see Figure 7).
4. Anchor the pedestal assembly to the floor with suitable anchors/fasteners (supplied by installer).
Figure 5
Figure 6
TOP VIEW OF PEDESTAL ASSEMBLY
