19
V4.0419
•
Content Subject to Change
O
PERATION
P
RE
-O
PERATION
C
HECKS
Before using the ICE RS26 Robotic Scrubber, always perform the following checks to ensure proper operation:
□
Clear all obstacles from the areas to be cleaned to ensure maximum fl oor coverage.
□
Be sure you understand the functions of all components of the machine.
□
Check the horn, warning light, and front and rear signal lights to ensure proper operation.
□
Check the machine for fl uid leaks.
□
Check the tank cover seals for damage and excessive wear.
□
Drain and clean the recovery tank, if necessary.
□
Clean the vacuum fan inlet fi lter, if necessary.
□
Check the vacuum hose for debris or blockage; fl ush out any obstacles.
□
Check the squeegee blades for damage, excessive wear, and defl ection. Rotate or replace as needed.
□
Check that the scrub brushes/pads is properly installed and is clean of restricting debris such as string,
banding, plastic wrap, etc.
□
Make sure the batteries are fully charged and free of damage.
□
Check the brakes and steering to ensure proper operation.
□
Check that all cameras and LIDARs are clean and free of dust, dirt, and smudges. Clean with the
provided
microfi ber cloth, as needed.
□
Fill the clean water tank with clean water via the hose fi ll clean water port of the left side of the machine
or via the bucket-fi ll port located under recovery tank. If using the bucket-fi ll port, ensure the recovery
tank is empty before accessing.
□
Using appropriate personal protective equipment, fi ll the solution bottle with an approved cleaning
solution.
Before using any cleaning chemicals:
1) Review the Safety Data Sheet (SDS) for the cleaning chemical.
2) Use appropriate personal protective equipment, as recommended by the cleaning chemical
SDS or chemical company.
3) Follow instructions and noted precautions in the SDS and on the container.
4) Provide appropriate cleaning chemical safety training.
WARNING
:
Do not put any fl ammable materials into the solution bottle or clean water tank. This
can cause an explosion or fi re.
