37
V4.0419
•
Content Subject to Change
O
PERATION
11. Rinse out the inside of the recovery tank and the
internal fl oat sensor (located underneath the
vacuum fan fi lter) with the recovery tank drain
hose still in the liquid disposal drain.
NOTE
:
RINSING THE TANK AFTER EVERY USE
HELPS PREVENT BUILDUP AND CLOGGING OF
THE WATER LINES.
12. Return the recovery tank drain hose to the rear of
the machine.
13. Close the recovery tank cover.
14. Remove the clean water tank drain hose on the
rear of the machine.
15. Hold the clean water tank drain hose upward and
remove the cap.
16. Lower the clean water tank drain hose to the
liquid disposal drain to empty the clean water
tank.
17. Make sure the recovery tank is empty and tilt it
back to access the clean water tank.
18. Rinse out the inside of the clean water tank and
the internal fl oat sensor with the clean water
tank drain hose still in the liquid disposal drain.
NOTE
:
RINSING THE TANK AFTER EVERY USE
HELPS PREVENT BUILDUP AND CLOGGING OF
THE WATER LINES.
19. Return the recovery tank to its upright position to
close the clean water tank.
20. Lower the operator seat.
