27
Fig. 28.
TCP Client in Link mode
5.5.3. UDP Mode
PC-W can be configured in a UDP mode to establish connection using Unicast or Multicast data from the
serial device to one or multiple host computers as shown in Fig. 29. Vice versa is also true. For example,
the original RS-422/ RS485 bus can be transferred and extended connection distance by PC-W.
The destination IP is assigned by a single IP or a group of IP addresses. The configuration is limited by the
Local Listening Port. For example, the PC-W listening port is 4660 which receives data sending from the
host computers. PC-W can support up to 4 group IP addresses for UDP connection, if users needed.
Note: In UDP mode, the device does not support Virtual COM mode.
Fig. 29.
UDP protocol in Link mode
5.5.4. Serial Settings
The Serial settings of parameters for PC-W are shown in Fig. 30. Users can configure Serial parameters
including UART Mode, baud rate, parity, data bit and type of flow control.
Configure UART Mode:
RS-232 or RS-485 or RS-422
Baud rate (bps):
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400
Parity:
None or Odd or Even or Mark or Space
Data bits:
7 or 8
Stop bits:
1 or 2
Summary of Contents for PC-W
Page 17: ...17...
Page 26: ...26 Fig 26 COM port Information Web Page Fig 27 TCP Server in Link mode...
Page 45: ...45...
Page 51: ...51 Fig 41 Configuration Wizard from Serial to IP tool...
