53
1. Press the
Enter
key to begin adjusting, or press the
Esc
key to exit this
dialog.
2. Adjust the system time or the screen off time.
3a. Finally, select the
Apply
button and press the
Enter
key to apply the
new value.
3b. Or select the Cancel button and press the
Enter
key to drop all the
changes.
6.1.2 Serial Communication Setup
In order to obtaining data from each meter, PM1600 must be entered the needed
information for each meter. PM1600 requires baud rate, data bits, stop bits and
priority from each meter. The above data should be provided by meter
manufacturer. After entering the proper values, click the apply key. If the data
enter is incorrect, PM1600 will show communication fail in the runtime mode.
1. Use the
Arrow
key to navigate among the fields. Press the
Enter
key to
begin editing.
2. Press the
Arrow
key to scroll the drop down box and press the
Enter
key
to choose the value.
3. Select the
Apply
button to apply the new value or the
Cancel
button to drop
the change, then press the
Enter
key .
3.
2.
1
.
ESC
