89
The last item is shed mode which users will determine the priority of shedding.
If sequence mode first is selected, PM1600 will do load shedding starting from
the sequence first mode list, then followed by the priority first mode list. If
priority first is selected here, PM1600 will do the load shedding starting from
priority first list then sequence first list later. Please also note where sequence
first mode is executed, the relay which on the top will be turned off first when it
is necessary, and followed by the second, third…etc. As the load reinstalled
start, the first relay, which is turned off, will be reinstalled first also. However, in
the priority first mode the relay which is turned off first will be reinstalled lastly
since it is the lowest priority for power usage.
