Setup Instructions
Setup Instructions
Step 5
Secure the air hose for the seating area with a metal clamp.
Step 6
Subsequently, screw the armrests to the left and right side
of the chair frame. The 3 screws that you need on each
side are already attached to the armrests.
Step 7
Install the remote control holder: loosen the 3 screws on
the outside of the right armrest with a cross-tip screw-
driver, position the holder and mount it with the same 3
screws.
Step 8
Put the remote control in the bracket.
Step 9
Connect the power cable with the main switch box on
the chair and plug it into a wall socket.
Step 10
Check again to make sure all steps are done properly –
your chair is now ready for use.
Step 6
Screw on the armrests
The 3 armrest screws
9
Summary of Contents for FLOAT
Page 1: ...brainLight 3D Shiatsu Massage Chair FLOAT...
Page 10: ...Acupressure Points 10...
Page 14: ......
