Conrad Meier Fish Harvester User Guide
Page 25
Page 24
Conrad Meier Fish Harvester User Guide
✔
The main line is connected securely and clipped to desired steering
hole .
✔
The motor engage/disengage knob is pulled out so that the winch
motor is disengaged and able to spin freely and plug batteries in.
✔
The trace rack is in position and loaded with traces (baited hooks or
sinkers).
Launching the Conrad Meier Fish Harvester
Follow the instructions below to launch the Conrad Meier Fish Harvester in the
water .
Step Action
1
Place the Conrad Meier Fish Harvester in water (at least knee deep
level), pointed in the desired direction.
2
Make sure the line is clear and free from obstruction.
3
Press GO on the remote control to activate the motor. Two LEDs will
light up to show the position of the rudder.
Tips:
•
Change direction by pushing the LEFT or RIGHT arrows.
•
Stop the Conrad Meier Fish Harvester by pressing STOP. Pressing
GO again will continue its original time setting and rudder
position.
Current
launch towards current
50m
Winch
Step Action
1
Press and hold the Start button.
2
The LED indicator will then display
the Battery level of the Conrad
Meier Fish Harvester batteries
(not the remote) when the
batteries are connected. The LED
indicators then switch to TIME SET
mode .
3
Use the left and right arrow
buttons to select the required run
time.
4
To deactivate and lock the remote,
press and hold the STOP button
for a few seconds . The remote will
automatically lock and deactivate
if no buttons are pushed for 30
minutes .
Note:
The range of the remote is approximately 1000 metres (3⁄4 mile).
Loading traces with bait
Put the trace rack in position and bait the hooks.
Note:
Once the Conrad Meier Fish Harvester is launched, you’ll have to work
fast to clip the traces on the line, so it is important that the traces are ready for
use .
Check before you launch
Before you launch the Conrad Meier Fish Harvester, go through the checklist
below to ensure everything is ready.
✔
All batteries are charged and plug batteries in.
✔
The hatch is closed securely .
✔
The Fish Harvester is responsive to remote control commands .
Launching the Conrad Meier Fish Harvester in strong
currents
Summary of Contents for Conrad Meier Fish Harvester
Page 1: ...Owner s Manual ...
