LTE Outdoor CPE
EN-34
3.
On
Remote Access
, select
Enable
from the drop-down list to enable
remote management function.
4.
Click
APPLY
to save changes.
Manage LED Light
Set the duration for the LED light to stay on.
1.
Click
Advanced Mode
tab and select
Admin
.
2.
Click
Management
.
3.
On
LED Light On Timer
, select the desired length of time from the
drop-down list.
4.
Click
APPLY
to save changes.
Select Operation Mode
Set the operation mode of the CPE.
1.
Click
Advanced Mode
tab and select
Admin
.
2.
Click
Management
.
3.
On
Operation
Mode
, select one of the following options:
Bridge
: Select Bridge mode if you will have another router in your
network to be set as the DHCP server. Clients in your network will directly
receive IP address assigned by the server. After selecting Bridge mode,
you may connect other routers or network devices. To access the CPE
web-based utility in bridge mode, you must configure the IP address of
the computer connected to the CPE with the IP address of the CPE.
Router
: Select Router mode to use the CPE as a router.
4.
Click
APPLY
to save changes.
