5
1.3 Power connection
Red: Positive
Black: Negative (GND)
Yellow: Ignition WIRE(ACC).
Tips: For testing in with a stable power source, RED+YELLOW connect with positive, and
BLACK connect with negative will start DVR.
NOTES
：
1
）
Please verify battery voltage before connecting with battery. DVR support 8V-36V power input.
DVR will be damaged if power input over 36V.
2
）
After connecting the cables, ensure that power cables are insulated to prevent short circuiting
and burning out the battery.
3
）
The Yellow cable must be connected to the vehicle ignition cable, otherwise the device will not
be able to execute the delayed shutdown and the final moment of the video will be lost.
4
）
Note: Connection to the vehicle's engine must be connected directly to the positive anode of
the battery. Do Not Use bond strap for grounding as it will produce negative pulses that would
interfere the device's normal operati
on. The negative pole of the power code must be Φ1.5mm and
above.
