8
English
A switch is located at the back of the device. The table below explains the opera
-
tion of this switch.
4. Installation
The night light can be permanently installed by using the wall bracket or the two
magnets at the back which can be attached to all ferromagnetic materials as to be
found on refrigerators, magnetic boards.
If you want to use the wall bracket, you have to install it on a wall at the desired
position. To do this, simply use the provided mounting wall plugs or the
adhesive pad. Ensure that there are no power cables or water pipes at the place of
installation, which could be damaged.
After installing the wall bracket, you can mount the night light on the bracket. For
this purpose, a hanger is provided at the back of the night light, using which you
can mount the device easily on the wall bracket.
The wall bracket is designed such that the night light can be removed at any time,
for example, to change the batteries. Or if you want to use the device as a mobile
light.
AUTO
During darkness, the light turns on automatically as soon as any
movement is detected. The light stays on for about 35 seconds.
OFF
The device is turned off.
ON
The device is permanently switched on. The light stays on con
-
tinuously.
