Getting started
English
- 44 -
Notifications & Characteristics & Accessories
Information relating to the environment
This television is designed to consume less power in
a bid to protect the environment. In order to effectively
reduce your electric energy consumption, you have
to follow the steps below:
If you set the energy economy mode to
Eco
, TV will
enter energy economy mode. The Eco mode can be
found from the main menu in the Picture settings,
under “Power Save Mode”. Note that some image
settings cannot be changed.
If the right navigation button is pressed when Eco
is displayed, the message
“screen will be off in
15 seconds”
will appear on the screen. Select the
Proceed
option and press
OK
to continue. The screen
will turn off automatically.Press any button on the
remote control to enable the screen again.
Turn the television of and disconnect it when not
in use. This good practice will also help you to
economise energy.
Standby notifications
1.
If the television does not receive any incoming
signal (an antenna or an HDMI source for
example) for 5 minutes, it will go on standby. The
next time it is turned on, the following message
will appear :
"Standby cause No Signal”.
Press
OK
to continue.
2.
If the television stays inactive for 4 hours, it will
enter standby mode. The next time it is turned
on, the following message will appear:
"Standby
cause No Signal”.
Press
OK
to continue.
Functions
• Colour television with remote control.
• Digital tuner cable and High definition TNT (DVB-
T/C)
• The HDMI ports are meant for devices with HDMI
plugs.
• USB ports.(with digital video recording function)
•
OSD Settings Menu.
• Scart socket for external devices (video camera,
video game, audio player, etc.)
•
Stereo sound system.
• Teletext.
• Headphone jack.
• Automatic settings system.
•
Manual setting.
• Automatic shutdown which can be set from 1 to 6
hours maximum.
•
Sleep timer.
•
Parental control lock
• Automatic sound-off when there’s no transmission.
• NTSC Video .
• AVL (Automatic Volume Limitation)
• PLL Tuner (Frequency scanning).
• PC port with Plug & Play function.
• Instant Plug&Play for Windows 98,ME, 2000, XP,
Vista.
•
Gaming mode (optional)
Accessories included
•
Remote control
• User manual
•
Batteries not included
Television’s command buttons
The control button & the Functioning of the TV
1
.
Up direction
2
.
Down direction
3
.
Programme / Volume / AV / Standby command
selection
The control button makes it possible to control the
‘‘
Volume’’ / ‘Programme’’ / ‘‘Source’’
functions and
to Enable Standby Mode on your television.
To adjust the volume:
Increase the volume by
pressing the
Up
button
. Reduce the volume by
pressing the
Down
button.
To change channels:
Press the centre of the button
for information on the channel to appear on the
screen. Browse through stored channels by pressing
the
Up
or
Down
button.
Getting started
Downloaded from www.vandenborre.be
