English
- 45 -
To change source:
Press the centre of the button for
the list of sources to appear on the screen. Browse
through sources by pressing the
Up
or
Down
button.
To turn off the television :
Press and hold down
the centre of the button for a few seconds until the
television enters Standby mode.
Inserting batteries in the remote control
Slide back the battery cover of the remote control.
Insert two
AAA
size batteries. Make sure that the
+ and – ends of the batteries match in the battery
compartment (observe the correct polarity). Put the
cover back in place.
Connecting the power cord
IMPORTANT
: This television is designed to operate
solely with a
220-240V ~ 50 Hz.
power source. After
removing the television from its packing, allow the TV
to reach ambient temperature before connecting it to
the electricity supply. Connect the power cord to the
mains socket outlet.
Connecting the antenna/Cable
Connect the aerial or cable lead to the ANTENNA
INPUT (ANT) found at the back of the TV set.
Notification
Manufactured under licence from Dolby Laboratories
MANUFACTURED UNDER LICENCE
"Dolby" and the double D symbol are trademarks of
Dolby Laboratories.
HDMI, the HDMI logo and the high definition
multimedia interface are marks or registered
trademarks of HDMI Licensing LLC.
Technical details
TV Frequency (tuner)
VHF (BAND I/III) - UHF
(BAND U) - HYPERBAND
Number of preset
channels
1000
Audio standard
Nicam Stereo
Channel indicator
On Screen Display
RF Input Socket
75 Ohms (unbalanced)
Operating voltage:
220-240V ~, 50HZ
AUDIO OUTPUT
POWER (WRMS.) (10%
THD)
2 x 6 WRMS
Power consumption
65W (max)
st-by power
consumption
0,5 W (max)
Weight with stand
6,70 kg
TV Dimensions DxLxH
(with stand)
185 x 744 x 490 mm
TV Dimensions DxLxH
(without stand)
102 x 744 x 451 mm
Operating temperature
and humidity
5ºC up to 45ºC, 85%
humidity max
Downloaded from www.vandenborre.be
