"COLD AREA" indicator
The sign opposite can be found in your fridge.
It clearly shows the coldest zone of your appliance, where the temperature is lower than
or equal to +4°C.
A temperature gauge in this zone allows you to check the settings of your fridge.
Adjust the thermostat
Temperature correct
Warning!
If the door of the fridge is left open for too long, the temperature inside the fridge will rise. Check the
temperature gauge within 30 seconds after opening the door to make sure that the reading is correct.
Setting the refrigerator:
Control panel
Control panel will be 100% lit up for 3s, which operates exactly as per the setting before the
power off. After that,operations are available.
Before your operation, make sure the control panel is in unlocking status.
In locking status, locking indicator will flash for 3s when you short touching any operation key,
but operations are not available.
Control panel will be locked 25s after the last operation.
Control panel will 100% light off 2 minutes after the last operation.
Control panel will be lit up once the door of fridge compartment is opened.
Control panel will be lit up once short touching operation keys.
There will be a prompt beep for any key operation.
USE & TIPS
ok
