Brandt bfl 2322 bw, Operating And Installation Instructions

37

Your appliance may be fitted a function

enabling 20 ice cubes to be produced in the

refrigerator compartment.  
The icemaker consists of a fixed element

placed inside the refrigerator and a removable

element containing the ice cube trays.  
To use this correctly, follow the instructions

below:
- Remove any food placed in front or that

could hinder your extracting the removable

element.  
- Grasp the removable element by the handle

and pull it out (Drawing R1).
- Remove the ice cube trays (Drawing R2).
- Fill the trays ¾ full with water.
- Return the trays to their housing; to avoid

wetting the areas below, ensure that you keep

the removable element in a vertical position.
- Return the removable element to the

refrigerated compartment and push it fully into

its housing (until you hear the click as it locks

in place). Insert it gently to avoid spilling the

liquid in the trays.
- It is suggested to regulate the temperature

to 4°c or 5°c (see section “Starting on and

adjusting the appliance).
- Wait approximately 24 hours (the time may

vary depending on the ambient temperature).
- Grasp the handle and take out the removable

element (Drawing R1).
- Remove the ice trays (Drawing R2).
- Extract the ice cubes simply by pressing on

the trays.
- Remove the Ice Cube system from its

housing once a month for one day to ensure

that it defrosts completely. 

If your appliance is equipped with the "ICE CUBE" and "SUPERCOOL" functions :
Activating the "SUPERCOOL" function (see "Starting and adjusting the appliance" section) enables
you to obtain ice cubes more quickly (the time required may vary depending on the ambient
temperature).

Ice maker (depending on the model)

EN

Drawing R1

Drawing R2