36
INSTALLATION
If your appliance is fitted
with
casters,
then
remember
that
they
should only be used for
short movements. Do not
move the appliance over
long distances on its
casters.
Clean
the
appliance
before connecting it to
the mains. Always unplug
your
appliance
before
any maintenance work.
Never pull on the power
cord, but only on the plug
itself.
Install the appliance in a
dry and well ventilated
place.
Avoid
balconies,
verandas
and
patios,
because excessively high
and low temperatures in
the summer and the
winter can prevent your
appliance
from
functioning properly, or
even damage it.
Do
not
place
the
appliance near a source
of heat, such as an oven
or a radiator.
Leave at least 3 and 5
cm clear around the sides
and 10 cm above the
appliance to
allow the air
to circulate
freely.
Place the appliance
at a suitable distance
from the wall using the
spacers contained in
the bag of accessories.
Your
appliance
is
designed
to
function
optimally
at
a
given
ambient temperature. In
this case, it is said to be
designed for a particular
"climate
class".
The
climate class is shown on
the ID plate inside the
appliance, on the bottom
of the left hand wall.
Beyond
these
temperatures,
the
performance
of
your
appliance may suffer.
Class
Ambient
temperature
SN
+ 10°C to + 32°C
N
+ 16°C to + 32°C
ST
+ 16°C to + 38°C
T
+ 16°C to + 43°C
Tips:
Once the appliance is
installed, adjust the feet so
that it is slightly inclined
rearwards. In this way, it
will be easier to close the
door.
Before putting any food in
the
fridge,
clean
the
appliance
