2
INTRODUCTION TO YOUR APPLIANCE
FR
Setting the Thermostat controls
Controls for the refrigerator and freezer are located at the fop shelf of
the refrigerating compartment.
When you first
install
your
refrigerator, set the Thermostat knob at 3.
Give your refrigerator
time to cool down completely before adding food. It is best to wait 24
hours before adding food.
The thermostat knob controls the temperature. The higher number
setting, the longer the compressor will run to keep the temperature
colder.
When the thermostat control knob is set to
OFF,
the refrigerator is not
running,
Defrosting
Refrigerator compartment –
Defrosting
process
is
automatic by thermostat knob
Melted frost flow into drip tray
and automatic evaporating.
Freezer compartment –
Defrosting
for
the
freezer
compartment
is
by
manual
process.
·
Turn the thermostat knob to set at
OFF
position and leave open the
freezer door.
·
Remove all foods, ice cube tray and shelf or transfer to refrigerating
compartment.
·
Clean and wipe out the melted frost with a cloth.
·
After defrosting, turn thermostat knob to origin position.
Note
: To avoid damaging the freezing compartment wall, do not use
any sharp objects to remove the frost or separate the frozen
food.
NOTE
: after charging the device for fresh food or after repeated
or prolonged door openings, it is normal that the inscription
"OK" does not appear in the temperature indicator.
Wait at least 12 hours before readjusting the thermostat.
