16
1. Press the button “ ”, its inner indicator
lights bright, the motor is running at low
speed and its indicator lights bright. Press
the button“ ” again, the indicators light
will be off. All the function of the hood will be
closed, the hood enters into standby mode.
2. Press the button “1”, its inner indicator
lights bright, the motor is running at low
speed. Press the button again, the motor
stops.
3. Press the button “2”, its inner indicator
lights bright, the motor is running at medium
speed. Press the button again, the motor
stops.
4. Press the button “3”, its inner indicator
lights bright, the motor is running at high
speed. Press the button again, the motor
stops.
5. Press the button “ ”, both spot lights
start bright. Press the button again, the lights
are switched off .
Summary of Contents for BHB1944IX
