Information
Su
ffi
cient air is needed for proper combustion and exhaustion of gases through
the
fl
ue (chimney) of fuel burning equipment to prevent back drafting. Ductless
fans must always be vented to the outdoors.
When assessing the air pressure, the entire ventilation system in the
house/apartment must be taken into account, e.g. hob and/or gas cooker, this
rule does not apply.
Government regulations must be observed for the conveyance of exhaust air.
If the extractor hood is used in circulating air mode with activated carbon
fi
lter,
there are no
operating restrictions.
Prepare the installation:
Ensure the power has been turned o
ff
before
beginning this installation. Plug must be
assembled in places easy to drag and insert.
To install this hood you will require two
assistants. You will need following tools
and material to complete this installation.
Tools you will need:
Drill appropriate to your wall
Phillips Screwdriver
Tape Measure
Hand Saw or Jig Saw
Installation work and electrical wiring must be done
by qua
lifi
ed person(s) in accordance with all applicable
codes and standards, including
fi
re rated construction.
Do not discharge the exhaust air into a
fl
ue from other
appliances burning gas or other fuels. Regulations
concerning the discharge of air have to be
fulfilled.
The cooker hood must be placed at a minimum distance
of 65cm above the cooking surface of a hob.
Min. 650mm
Max. 750mm
597/897mm
A
If you choose extraction-air mode,
install check valve on the vent hole .
20
Summary of Contents for BHC6601B
