06
INSTRUCTIONS FOR FITTING
Size of the space
Height (1)
1,780 mm
Depth (2)
550 mm
Width (3)
560 mm
For safety reasons, ventilation must
be provided as indicated in the
diagram opposite.
Warning: do not obstruct the
ventilation openings.
It is also necessary that the space
has a ventilation opening with the
following measurements:
Depth
50 mm
Width
540 mm
Insert the appliance into the space
against the internal partition,
corresponding to the hinging side of
the door, so the upper cover cap is
just proud (1) and the bottom hinge
is aligned with the partition of the
furniture (2).
Fix the appliance in place with the 6
screws provided for this purpose.
(I = 4 short screws) (P = 2 long
screws)
Insert the compressible gasket
between the appliance and the
furniture.
cabinet
Insert the caps (C-D) on the fin stops
and in the holes of the hinges.
Depending on the model, apply the
ventilation grill (B) and the hinge
cover.
(E).
Separate the parts Ha, Hb, Hc, Hd as
shown in the drawing.
Place the runners (Ha) on the internal
part of the furniture support and
mark the position of the external
holes. After trying out the holes, fix
the runners with the screws
provided.
Click the cover (Hc) onto the runner
(Ha).
EN
1/ INSTALLING YOUR APPLIANCE
Summary of Contents for BIC2272SW
Page 2: ...02...
