USE
USE
12
EN
Your hob has a child lock which locks the controls
when the appliance is switched off or during
cooking. For safety reasons, however, the
button remains active and allows the heating
zones to be switched off even when locked.
Locking :
Press the
button until the
lock symbol
appears and a beep confirms your operation
The display of the operating cooking zones now
shows the power and the lock symbol alternately.
The display of the operating cooking zones now
shows the power and the lock symbol alternately.
Unlocking :
Press the button until the
symbol
di-
sappears and a beep confirms your operation.
CHILD SAFETY
CLEAN LOCK function:
The Clean Lock function allows the table to be
temporarily locked during cleaning.
To activate the Clean Lock function, press the
button briefly, a beep will sound and the
symbol will flash. After about 1 minute, the lock is
automatically deactivated. A double beep is heard
and the
symbol disappears. You can deac-
tivate the Clean Lock function at any time by
pressing and holding the
button.
Boil Function
This function allows you to boil and maintain the
boiling of water for cooking pasta for example.
Select your cooker and press the "Boil" button
.
By default, the quantity of water proposed is 2
litres but you can modify it using the + or - buttons.
Set the desired quantity of water (from 0.5 to 6
litres).
.
Confirm by pressing the "Boil" symbol
or wait
a few seconds and the confirmation will be
automatic.
The cooking process starts.
A beep will sound when the water is boiling and
"Boil" will appear on the display.
Pour in the pasta and confirm by pressing the
"Boil" button
.
By default the display suggests power 8 and a
cooking time of 8 minutes.
However, you can adjust the proposed power and
cooking time.
A beep will sound at the end of the cooking time.
NOTE: It is important that the water is at room
temperature when you start cooking. Do not use a
cast iron pan for this function.
You can also use this function to cook any food
that needs to be cooked in boiling water.
Recall Function
This function displays the last power and timer
settings of all burners that have been switched off
for less than 3 minutes.
When the hob is in operation, the function recalls
the power and timer settings of the hob(s) that
have been switched off for less than 30 seconds.
To use this function, the hob must be unlocked,
press the On/Off button, then press the
button briefly.
