20
3)
USING YOUR MACHINE
a)
Putting into Service
Do not use the machine too close to curtains or any other flammable
materials.
Install the required cooking plate depending on your preparation (one large pancake or 7
small pancakes).
Plug in the machine. Turn the temperature selector (4) to Position ●●. Pre-heat your
appliance on Position ●● for 15 minutes.
The temperature rise indicator comes on when the thermostat begins to work. When the
desired temperature is reached the thermostat cuts out and the indicator light goes out.
After pre-heating for 15 minutes pour the pancake batter onto the plate.
TEMPERATURE
THERMOSTAT POSITION
80 °C
●
240 °C
●●
b)
Cooking Pancakes
After 15 minutes you can pour the pancake batter onto the plate.
Make sure the amount of pancake batter is not excessive. If you use too much batter, this
could overflow and soil the machine.
It is easy to see if the pancake is cooked. If the pancake batter does not stick to the plate
then the pancake is cooked.
Once cooking is finished you can keep your pancake warm by turning the thermostat back
to Position ●.
To remove the cooked pancake, use the spatulas supplied.
Do not use a metal or pointed object otherwise you could damage the
surface of the cooking plate.
Summary of Contents for CR1500NR
