18
If the toaster starts to smoke press the "Stop" button to stop browning.
Never try to remove bread that is stuck in the slots without unplugging the toaster
beforehand.
3)
USING YOUR MACHINE
a) Toaster
Plug the toaster into the mains.
Place the slices of bread in the slot.
Use the selector to choose the degree of browning: the higher the number the greater the
degree of browning.
When using for the first time we recommend putting the browning selector on 3.
When choosing the degree of browning be careful to take into account the type of bread
selected. Dry bread and thin slices toast faster than fresh bread and thick slices. Thus the
selection of the degree of browning varies depending on the type of bread, its quality and
its thickness.
Lower the lever until it locks at the bottom. The indicator light for the Stop button comes
on and the auto-adjustable slides wedge themselves onto the bread automatically. The
browning cycle starts.
If the toaster is not plugged in and the degree of browning is not set, the lever will
not lock at the bottom and the heating cycle will not start.
When the heating time has elapsed the bread pops up automatically and the toaster
disconnects itself. To remove the bread without burning yourself use the "Extra high lift"
by lifting the lever manually.
To start a new browning cycle wait 1 or 2 minutes before using the toaster again.
During the browning cycle you can see the colour of the toast. If it suits you press the
"Cancel" button so that the bread pops up automatically.
The Extra high lift makes it possible to remove the smallest pieces by lifting the lever
to 20 mm above its starting position.
b) Reheating
This function makes it possible to reheat toast that has gone cold without
toasting it any more. To reheat your toast press the Reheat button. An
indicator light comes on. When the reheating time has elapsed the bread
pops up automatically and the toaster disconnects itself. To remove the
bread without burning yourself use the "Extra high lift" by lifting the lever
manually.