19
1.
Slide the appliance into the recess, pushing it
against the wall on the handle side.
2. Apply joint the sealing strip as shown in figure.
D132
A
D022
3. Open the door and push the appliance against the
side of the kitchen unit opposite to that of ap-
pliance hinges. Fasten the appliance with 4
screws provided in the kit included with the
appliance. Snap vent grille (C) and hinge cover (D)
into position.
D727
C
D
4. Apply covers (B) on joint cover lugs and into hinge
holes.
D013
B
B
5. Separate parts A, B, C, D as shown in the figure.
PR266
A
B
C
D
6. Place guide (A) on the inside part of the furniture
door, up and down as shown in the figure and
mark the position of external holes. After having
drilled holes, fix the guide with the screws
supplied.
20mm
A
50mm
PR166
